Posted: February 20th, 2023
Part 5: Scenario-Based Case Study
For this assignment, you will submit Part 5 of the scenario-based case study course project, which is due in Unit VIII. You should evaluate and revise the recommendations as needed during the process for each previous unit as you learn more during the progression of this course. Please continue to draw upon your imagination to think creatively on potential concerns with fire and explosive hazards, fire controls, and fire and emergency management. Look at fire protection technology in a holistic way that is significantly different from what was previously designed by thinking in isolation. You will evaluate and develop recommendations to resolve potential fires in the future.
Section I
As you make suggestions to improve the water-based fire sprinkler system, refer back to the background information, if needed, to provide you with the necessary material to identify the basic components common to fire protection for the City of Washington Distribution Warehouse. In addition, review the Points to Ponder Scenario in the Unit V Lesson for additional information.
This assignment is not looking for compliance with building codes nor expecting you to be a fire protection system designer. However, the purpose of this assignment is for you to apply the concepts and knowledge you learned in this unit as you begin writing your final project covering protection systems that will detect, contain, control, and extinguish a fire. This assignment provides you with the opportunity to use your skills, expertise, and experience to enrich your response.
Prepare a well-organized narrative that addresses foam and water-based fire sprinkler systems and includes your recommendations after reviewing the background information and the information above. Your discussion will consist of your evaluation of the previous water-based sprinkler system, based on information from the textbook and any additional research needed for your recommendations for the rebuild of the warehouse. Discuss the importance of water pressure, and determine the pressure for seven sprinkler heads discharging 157.5 gallons of water per minute.
Section II
As we saw in the Points to Ponder Scenario in the unit lesson, hot work is capable of generating a spark or heat from welding, cutting, grinding, burning, melting, or brazing, which can lead to a fire. Based on the scenario in the lesson, describe designated work areas. Discuss if hot work permits are required anytime hot work is performed in an undesignated area. Discuss the role of fire watch and if that individual has the authority to stop the hot work.
For this assignment, you will write a two-page narrative (one page per section) supporting your position. Use APA level one headings for each section. The heading should be indicative of the major section to follow. You must have a title page and references page. You may use information from reputable, reliable journal articles, case studies, scholarly papers, and other sources that you feel are pertinent. You should use at least three sources, one of which must be your textbook. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations following proper APA style.
Part 6: Scenario-Based Case Study
For this assignment, you will submit Part 6 of the scenario-based case study course project, which is due in Unit VIII. You should evaluate and revise the recommendations as needed during the process for each previous unit as you learn more during the progression of this course. Please continue to draw upon your imagination to think creatively on potential concerns with fire and explosive hazards, fire controls, and fire and emergency management. Look at fire protection technology in a holistic way that is significantly different from what was previously designed by thinking in isolation. You will evaluate and develop recommendations to resolve potential fires in the future.
Section I
As you make suggestions to improve the standpipe and hose systems, refer back to the background information, if needed, to provide you with the necessary material to identify the basic components common to fire protection for the City of Washington Distribution Warehouse. In addition, review the Points to Ponder Scenario in the Unit VI Lesson for additional information.
This assignment is not looking for compliance with building codes nor expecting you to be a fire protection system designer. However, the purpose of this assignment is for you to apply the concepts and knowledge you learned in this unit as you begin writing your final project covering protection systems, which will detect, contain, control, and extinguish a fire. This assignment provides you with the opportunity to use your skills, expertise, and experience to enrich your response.
Prepare a well-organized narrative addressing the standpipe and hose systems and your recommendations after reviewing the background information and information above. Your discussion will consist of your evaluation of the previous standpipe and hose system, including classification and components, using information from the textbook and any additional research needed for your recommendations for the rebuild of the warehouse, including any impairments to standpipe and hose systems.
Section II
Read the Points to Ponder Scenario in the unit lesson before responding to this section. What are the various factors surrounding the ignition of cooking oil fires involving intermediate bulk container totes? What is the most effective extinguishing method for cooking oil fires? Consider the fire dynamics of cooking oil on the design of fire protection.
For this assignment, you will write a two-page narrative (one page per section) supporting your position. Use APA level one headings for each section. The heading should be indicative of the major section to follow. You must have a title page and references page. You may use information from reputable, reliable journal articles, case studies, scholarly papers, and other sources that you feel are pertinent. You should use at least three sources, one of which must be your textbook. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations following proper APA style.
Part 7: Scenario-Based Case Study
For this assignment, you will submit Part 7 of the scenario-based case study course project, which is due in Unit VIII. You should evaluate and revise the recommendations, as needed, during the process for each previous unit as you learn more during the progression of this course. Please continue to draw upon your imagination to think creatively on potential concerns with fire and explosive hazards, fire controls, and fire and emergency management. Look at fire protection technology in a holistic way that is significantly different from what was previously designed by thinking in isolation. You will evaluate and develop recommendations to resolve potential fires in the future.
Section I
As you make suggestions to improve the fire protection system, identify the components and accessories common to fire pump installations needed for the rebuild of the warehouse. Refer back to the background information, if needed, to provide you with the necessary material to identify the basic components common to fire protection for the City of Washington Distribution Warehouse. In addition, review the Points to Ponder Scenario in the Unit VII Lesson for additional information as well as Chapter 6 in the textbook.
This assignment is not looking for compliance with building codes nor expecting you to be a fire protection system designer. However, the purpose of this assignment is for you to apply the concepts and knowledge you learned in this unit as you begin writing your final project covering protection systems that will detect, contain, control, and extinguish a fire. In addition, this assignment provides you with the opportunity to use your skills, expertise, and experience to enrich your response.
Prepare a well-organized narrative addressing fire pumps and including your recommendations after reviewing the background information and the information above. Your discussion will consist of your evaluation of the previous fire pump and recommendations for the rebuild of the warehouse, based on information from the textbook and any additional research.
Section II
As we saw in the Points to Ponder Scenario in the unit lesson, electrical surge protection devices could have mitigated damage or even loss to the pump driver. Describe the benefits that surge protection devices provide for fire pump components and systems against the damages of voltage surges.
For this assignment, you will write a two-page narrative (one page per section) supporting your position. Use APA level one headings for each section. The heading should be indicative of the major section to follow. You must have a title page and references page. You may use information from reputable, reliable journal articles, case studies, scholarly papers, and other sources that you feel are pertinent. You should use at least three sources, one of which must be your textbook. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations following proper APA style.
Part 8: Scenario-Based Case Study
You have completed seven parts on your recommendations for the scenario-based case study and are now completing the final assignment for your project, which is your final submission. Be sure to apply any of the professor’s recommended corrections to the previous sections before submitting the final report in this unit.
Section I (Executive Summary)
In this section, you will prepare a well-organized and thoughtful summary of your recommendations for the fire protection system for the scenario-based case study course project on the City of Washington Distribution Warehouse fire. This summary should expound on what you have learned during the different parts covered in each unit, so you can understand issues that exist within the fire protection technology field. Place the summary after the title page, and follow it with each unit’s recommendations.
The purpose of the executive summary is to provide a narrative about the project with sufficient detail to allow readers to be able to accurately describe your recommendations to resolve potential fires in the future. Explain how your recommendations for the scenario-based case study relate to the methodology you chose and to the project outcome and conclusions. In other words, your summary must be clear, logical, and demonstrate alignment among the goals, methods, and outcomes.
The executive summary should be at least one page in length.
Section II
As you make suggestions to improve the fire protection system, identify the components and accessories common to smoke management and smoke control systems needed for the rebuild of the warehouse. Refer back to the background information, if needed, to provide you with the necessary material to identify the basic components common to fire protection for the City of Washington Distribution Warehouse. In addition, review the Points to Ponder Scenario in the Unit VIII Lesson for additional information.
As with the other assignments, this assignment is not looking for compliance with building codes nor expecting you to be a fire protection system designer. However, the purpose of this assignment is for you to apply the concepts and knowledge you learned in this unit as you finish writing your final project covering protection systems that will detect, contain, control, and extinguish a fire. In addition, this assignment provides you with the opportunity to use your skills, expertise, and experience to enrich your response.
For this section, prepare a well-organized narrative addressing smoke management and smoke control systems with your recommendations after reviewing the background information and the Points to Ponder Scenario. Your discussion will consist of your evaluation of information about smoke management and smoke control systems from the textbook as well as from additional research.
Section II should be at least one page in length.
Remember, you may use information from reputable, reliable journal articles, case studies, scholarly papers, and other sources that you feel are pertinent. You should use at least three sources, one of which must be your textbook. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations following proper APA style.
Final Assignment—Bringing It All Together
Compile the entire scenario-based case study recommendation into one cohesive report, and write the conclusion. Each unit assignment that was previously submitted should be edited or corrected based on you professor’s feedback.
Your final report must use APA style guidelines and include the components listed below.
· ♣ Include a title page.
· ♣ Provide an executive summary, which should be placed as the first section of the report. The summary should not only contain background information; it should also clearly state the recommendations. Use paragraph format for the summary.
· ♣ The body should include each unit’s recommendations using level one, level two, or level three headings to separate and organize your paper’s sections.
· ♣ Include a concluding paragraph that recaps and summarizes your key improvements for the warehouse. Focus on the expected results of your recommendations and not the background of the scenario-based case study.
SOLUTION
Place an order in 3 easy steps. Takes less than 5 mins.